Extending The Battery Life; Powering Your Phone On/Off; Setting Up Your Phone For The First Time - Zte Blade Spark AT&T User Manual

If the battery is low, there will be a pop-up message on the
screen . As you charge your phone, the screen will show you the
exact battery level on the Status Bar .
This device contains a nonremovable battery. Attempting
to remove will void your warranty and could cause serious
injury. Do not damage, alter, or try to remove the battery.
Warning! Use only ZTE-approved chargers and cables . The use of
unapproved accessories could damage your phone or cause the
battery to explode .
Caution: Do not attempt to change the built-in rechargeable
battery yourself . The battery can only be changed by ZTE or a
ZTE-authorized service provider .
Note: Use the USB Type-C™ charger that
comes in-box with your phone to charge
the battery .
1 . Connect the adapter to the charging port .
2 . Connect the charger to a standard AC wall
outlet . If the phone is on, you'll see a charging
icon, such as or , appear in the Status Bar .
3 . Disconnect the charger when the battery is
fully charged .
Note: If the battery is extremely low, you may be unable to power
on the phone even when it is being charged . In this case, try
again after charging the phone for at least 20 minutes. Contact
customer service if you still cannot power on the phone after
prolonged charging .
8

Extending the Battery Life

Active applications, screen brightness levels, Bluetooth and Wi-Fi
usage, and GPS functionality can drain your battery . You can
follow the helpful tips below to conserve your battery power:
• Reduce the screen backlight time .
• Lower the screen brightness .
• Turn auto-sync, Wi-Fi, and Bluetooth off when not in use.
• Disable the GPS function when not in use . Most applications

Powering Your Phone On/Off

• Press and hold the Power key to power on your phone .
• To turn it off, press and hold the Power key to open the
Note: If the phone freezes or takes too long to respond, press and
hold the Power key for about 10 seconds to restart the phone .

Setting Up Your Phone for the First Time

When you first power on your phone after you purchase it or
reset it to factory settings (see Settings – Personal – Backup &
Reset), you will need to set it up before using it .
Tap the language field to select a language. Then tap LET'S GO
and follow the prompts to set up your Wi-Fi connection, Google
services, name, device protection, and other options .
Note: Users with low vision can tap Vision Settings on the initial
setup screen to customize accessibility features .
GETTING STARTED GETTING STARTED
using this function will periodically query the GPS satellites for
your current location; each query drains your battery .
options menu . Tap Power off .
9