Disassembly and Assembly Instructions
1) Go through the slide FPCB to the lower's
13
hole
2) Beware that you do not damage slide FPCB
1) Drivers 4 screws on the lower
15
1) Be careful not to make scratch and molding damage!
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
14
1) Assemble the upper ass'y and lower
2) Attach the slide FPCB to the lower
1
2) Beware that you do not damage slide FPCB
16
1) Attach the screw cap 2point
1) Be careful not to make scratch and molding damage!
11-12
2
Attach guide rib