Installing Or Replacing A Pci Card - Lenovo ThinkStation P310 Hardware Maintenance Manual

7. Position the new memory module over the memory slot. Ensure that the notch
module is aligned with the key
the retaining clips completely close.
Figure 25. Installing a memory module
8. Reinstall the PCI Express x16 graphics card if you have removed it.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 166.

Installing or replacing a PCI card

Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 "Read this first: Important safety information" on page 1.
Your computer has two PCI Express x1 card slots, one PCI Express x16 card slot (negotiable link width x4,
x1), and one PCI Express x16 graphics card slot.
To install or replace a PCI card, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
2. Remove the computer cover. See "Removing the computer cover" on page 90.
2 in the slot. Push the memory module straight down into the slot until
1 on the memory
.
Chapter 9 Installing or replacing hardware
99