Canon PowerShot A300 User Manual page 97

To print the date, set the [Date] setting in the print the [Date] set he [Date] set g in the print in the print the
order menu, in Step 2 on the previous page, to 2 on the pre 2 on the prev s page, to s ge, to
[On]. You cannot set the date to print with the the d the date to prin t with the with the h the
[Style] menu in Step 3 on the previous page (p. 94). 3 on the previous 3 on the previous page (p. 94) page (p. 94). e (p
If the print type is set to [Index], the date will t to [Index], the d t to [Index], the ate wil ate wi
not print even if the [Date] setting is set to [On] Date] setting i Date] setting i
in Step 2.
When [Print Type] is set to [Both], you can set both
the [Date] and [File Number] to [On] on your
camera. However, if you print the [Index], only the
file number will be printed. (If it's a BJ printer, when
you print the [Index], neither the date nor the file
number will be printed)
When [Print Type] is set to [Standard], the file
number is not printed.
When the Print Type is set to [Index], the ype is set t pe is set t In nd de
number of images that will be printed es that will b es that will b pri p in
depends on the size of the paper. e si e si p per r
• Card Size: 20 images 20 20 i
• L Size: 42 images ma ma
• Postcard Size: 63 images ze: 63 image ze: 63 images
(For information on resolution when printing n on resol n on resolu
with a BJ printer, refer to its manual)
Cancel Printing (p. 86)
Restarting Printing
Printing
●
• In the Print Order menu, select [Resume] • the t he rint O rint O
using usi usin sin button and press the SET
b b button. The remaining images can be
printed.
• Printing cannot be restarted under the
following circumstances.
- If the print settings have been changed
before restarting.
- If the image for which the print settings
were set has been deleted before s be be
restarting.
- If there was very little free space on the f there was v f there was v
CF card when the printing was F card wh F card wh
cancelled. celled. celled.
If these circumstances apply, you can If If circ circ
select [OK] in the print screen and reprint K] K]
starting from the first image. If printing rom rom
stops because the battery charge runs
out, change to an AC Adapter Kit
ACK800, or to fully charged AA-size
NiMH batteries before turning the
camera on.
Printing Errors (p. 115)
●
97