Plug and Play Capability
You can install the monitor in any Plug and Play-compatible system. The monitor
automatically provides the computer system with its Extended Display Identification Data
(EDID) using Display Data Channel (DDC) protocols so the system can configure itself
and optimize the monitor settings. Most monitor installations are automatic; you can
select different settings if desired. For more information about changing the monitor
settings, see
Operating the
Universal Serial Bus (USB) Interface
This section gives you information about the USB ports that are available on the monitor.
NOTE: This monitor is Super-Speed USB 3.0 compatible.
Transfer Speed
Super-speed
High speed
Full speed
* Up to 2A on USB downstream port (port with
compliance devices or normal USB devices.
USB 3.0 Type-C
Video
Data
Power Delivery (PD)
USB Upstream Connector
Pin Number
1
2
3
20
|
About Your Monitor
Monitor.
Data Rate
5 Gbps
480 Mbps
12 Mbps
Description
DP1.2
USB 2.0
Up to 100 W and 95 W (typical)
9-pin Side of the Connector
VCC
D-
D+
Power Consumption*
4.5 W (Max, each port)
4.5 W (Max, each port)
4.5 W (Max, each port)
battery icon) with BC1.2