How To Fit The Bikes On The Bike Carrier - AKG 10870 Installation Manual

Keep at due distance from the bike carrier /bike and the tail pipe of the car in
–
order to avoid any damages due to the excessive heat.
Phase 2
Now you have to open the quick stop system Fig.A.
–
Afterwards you can connect the rear towbar bike carrier to the towing hitch and you have to lift it
–
slightly Fig.B.
Now you have to push down the quick stop system Fig.C.
–

9. HoW to FIt tHe bIkeS on tHe bIke carrIer

Warning: before fitting bikes on to the bike carrier, switch off the engine, turn the ignition key to the
–
off position and apply the hand brake! The vehicle must be in a horizontal position.
Bikes are fitted on to the bike carrier different phases.
–
This chapter describes these phases in detail, in the succession required.
–
21