HP elitedisplay e230t User Manual page 14

4. Connect the Type B connector of the USB upstream cable to the USB upstream port on the rear of the
monitor. Then connect the cable's Type A connector to the USB downstream port on the source device.
5. Connect one end of the AC power cord to the power connector on the rear of the monitor, and the other
end to an AC outlet.
WARNING!
Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
Plug the power cord into a grounded (earthed) AC outlet that is easily accessible at all times.
Disconnect power from the equipment by unplugging the power cord from the AC outlet.
For your safety, do not place anything on power cords or cables. Arrange them so that no one may
accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging the power cord
from the AC outlet, grasp the cord by the plug.
8 Chapter 1 Getting Started
To reduce the risk of electric shock or damage to the equipment: