Led Lighting; Back-Up Lamps - Cadillac ATS 2018 Owner's Manual

278 VEHICLE CARE
Warning (Continued)
could be seriously injured. Have
your dealer or a qualified technician
service them.
After an HID headlamp bulb has been
replaced, the beam might be a slightly
different shade than it was originally.
This is normal.

LED Lighting

This vehicle has several LED lamps.
For replacement of any LED lighting
assembly, contact your dealer.

Back-Up Lamps

1. Back-Up Bulb Socket
2. Back-Up Lamp Assembly
To replace one of these bulbs:
1. Reach under the rear fascia and
locate the back-up lamp
assembly.
2. Remove the bulb socket (1) by
turning counterclockwise and
pulling straight out of the lamp
assembly (2).
3. Pull the bulb out of the socket.
4. Install the new bulb in the bulb
socket.
5. Install the bulb socket by turning
clockwise.