Setup - Panasonic SH-FX71 Operating Instructions Manual

SH-FX71_RQTX1122-Y_En.book Page 6 Thursday, November 19, 2009 4:48 PM

Setup

Preparation
≥ Turn off all equipment before connection and read the appropriate
operating instructions.
≥ Connect the AC power supply cord after all other connections are
complete.
[Note]
≥ Do not use the wireless system and digital transmitter inside a metal
cabinet or bookshelf.
≥ Do not attempt to connect any extra surround speakers to the home
theater unit.
≥ Place the wireless system within approximately 10 m (33 ft) from the
home theater unit.
To avoid interference, maintain the following distances between
the wireless system and other electronic devices that use the
same radio frequency (2.4 GHz band).
e.g.
Wireless
system
The wireless system will automatically seek a clear channel if any of
these other devices interfere with its communication.
When this happens, the wireless link indicator (" [W] " or an indicator)
flashes on the home theater unit, and there will be a brief audio
interruption coming from the surround speakers.
This is the normal operation of the product working to assure the best
possible performance of your home theater unit.
If the interference persists, try moving the other devices to another
location outside the range of the wireless system, or move the wireless
system nearer to your home theater unit.
6
6
∫ Wireless setup diagram
5.1ch
e.g.
Wireless LAN: approx.
2 m (6 / ft)
1
2
Surround speaker cables (included)
Surround speakers are not included.
Cordless phone and other
electronic devices:
LS: Surround (left), RS: Surround (right)
approx. 2 m (6 / ft)
1
2 ≥ Place on the side of or slightly behind the seating position.
Home theater unit
(with the digital
transmitter)
Seating
position
Wireless system