Audiovox Rampage AXT240 Owner's Manual page 9

Audiovox two way family radio owner's manual fr-240

Hide thumbs Also See for Rampage AXT240:

Table of Contents

Function Select Button

Pressing this button will sequentially allow selection of the channel

number or Continuous Tone Coded Squelch System. Pressing the

button once from the standby mode, will allow setting of the

channel number. This will be indicated by the slow flashing of

the channel number display. Pressing the button a second time

within 5 seconds will allow setting of the CTCSS code. This will

be indicated by the slow flashing of the code number. If no

buttons are pressed for 5 seconds, the unit will return to standby

mode and the display will indicate the current channel. Pressing

the Function Select button a third time or pressing the P (Push to

Talk) or monitor buttons will also return to the standby mode.

To Select a Channel

Press and release the function

select button until the channel

number flashes on the display. Use

Button

the up and down buttons to select

Down

the desired channel from 1 to 14.

Button

The current channel setting will be

shown on the display.

Function

Select Button

-7-

Table of Contents

Fr-240