Cadillac CTS-V 2009 Owner's Manual page 92

Hide thumbs Also See for CTS-V 2009:
Table of Contents

Advertisement

For vehicles with the memory feature, press
keyless access transmitter to program and recall the
memory settings. See Memory Seat, Mirrors and Steering
Wheel on page 1-8 for more information.
/
(Remote Start): Press to operate the remote start
feature. See Remote Vehicle Start on page 2-14
for additional information.
G
(Trunk): Press and hold for about one second to
unlock the trunk. If the engine is running, the shift lever
must be in P (Park) for an automatic transmission or in
Neutral with the parking brake set for a manual
transmission.
L
(Vehicle Locator/Panic Alarm): Press and release
to locate the vehicle. The horn sounds three times
and the turn signal lamps flash three times.
L
Press and hold
for three seconds to sound the panic
alarm. The horn sounds and the turn signal lamps flash
for 30 seconds. Press and release
alarm.
The vehicle comes with two transmitters. Each
transmitter will have a number on top of it, "1" or "2".
These numbers correspond to the driver of the vehicle.
For example, the memory seat position for driver 1 will be
recalled when using the transmitter labeled "1", if enabled
through the DIC. See Memory Seat, Mirrors and Steering
Wheel on page 1-8 and DIC Vehicle Customization
onpage 3-72.
2-10
K
on the
L
again to stop the
Programming Transmitters to the
Vehicle
Only keyless access transmitters programmed to the
vehicle will work. If a transmitter is lost or stolen,
a replacement can be purchased and programmed
through your dealer/retailer. The vehicle can be
reprogrammed so that lost or stolen transmitters no
longer work. Each vehicle can have up to four
transmitters matched to it.
Programming with a Recognized
Transmitter
A new transmitter can be programmed to the vehicle
when there is one recognized transmitter. For vehicles
sold in Canada, two recognized transmitters are required
to program a new transmitter.
1. The vehicle must be off.
2. Both the recognized and new transmitters must be
with you.
3. Insert the vehicle key into the key lock cylinder
located on the outside of the driver door.

Advertisement

Table of Contents
loading

Table of Contents