Manual Recording; Automatic Track Increment - Philips FW-R7 User Manual

Manual recording

Manual recording from an external source
1 Make sure the CDR(W) is absolutely free of scratches and
dust particles.
2 Press repeatedly DIGITAL / ANALOG AUX to select the
input for the external source you want to record from.
is displayed if the digital input is
y
selected.
y is displayed if the analogue input is
selected.
3 Press REC TYPE on the set to enter the recording menu.
4 Rotate JOG CONTROL to select the type of recording.
y : for manual start of recording
5 Press YES to confirm your selection.
is displayed.
y
, and the remaining recording time of
y
the CDR(W) are displayed.
6 Start playback on the external source in order to set the optimal
recording level on the CD recorder (see "REC LEVEL key").
7 Stop playback on the external source.
8 Go to the beginning of the desired track.
9 Press YES on the set and simultaneously start playback on
the external source.
The CD recorder starts to record and
y
is shown. The remaining recording time of the
PROGRESS
CDR(W) is displayed.
Note: If is flashing, check the digital
connection.
10 Press STOP & on the set to stop recording.
is displayed and
y
DO NOT FORGET TO FINALIZE!
Finalizing a CDR(W) disc is a simple procedure, necessary to:
– play a recorded CDR on a standard CD player or
– play a recorded CDRW on a CDRW compatible
CD player and CD recorder.
RECORDING IN
goes off.
RECORDING IN PROGRESS
EXTERNAL RECORDING

Automatic track increment

In recording mode tracks will be incremented automatically
such that the track numbers are positioned on the same
position as the original.
• To switch the automatic track increment function on, press
as often as necessary TRACK INCR. on the remote control
during stop when CDR is selected.
is displayed and the function is switched
y
on. Track increments are now automatically detected
from digital source material. In analogue source material
a silence of 2.7 seconds or more is detected as a track
increment.
• To switch the automatic track increment function off,
press as often as necessary TRACK INCR. on the remote
control during stop when CDR is selected.
is displayed and the function is
y
switched off. Track numbers can now be incremented
manually by pressing TRACK INCR. on the remote control
during recording. The minimum track length is 4 seconds.
Notes: – Track numbers cannot be changed after recording.
– The automatic track increment only works with
consumer sources with a digital output signal
according to the IEC 958 (consumer part) audio
standard. DAT, DVD and DCC do not deliver this signal.
21