Specification - LG 55LH95QD Service Manual

NOTE : Specifications and others are subject to change without notice for improvement.
1. Application Range
This specification sheet is applied to the LCD TV used LC91E
chassis.

2. Specification

Each part is tested as below without special appointment
1) Temperature : 25 ± 5°C (77 ± 9ºF), CST : 40 ± 5ºC
2) Relative Humidity : 65 ±10%
3) Power Voltage : Standard input voltage
(100-240V@ 50/60Hz)
* Standard Voltage of each products is marked by models
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
5) The receiver must be operated for about 20 minutes prior to
the adjustment.
4. General Specification(TV)
No.
1. Receiving System
2. Input Voltage
3. Market
4. Screen Size
5. Aspect Ratio
6. Broadcasting systme
7. LCD Module
8. Operating Environment
9. Storage Environment
Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
SPECIFICATION
Item
3. Test method
1) Performance : LGE TV test method followed.
2) Demanded other specification
- Safety : CE, IEC specification
- EMC : CE, IEC specification
Specification
Analog : Upper Heterodyne
Digital : COFDM, QAM
100- 240V~, 50/60Hz
China
55 inch Wide (1920 x 1080)
16:9
1) PAL-DK
2) PAL-I
3) NTSC-M
4) DTMB
5) DVB-C
LC550WUL-SBT1
1) Temp : 0 ~ 40 deg
2) Humidity : ~ 80 %
1) Temp : -20 ~ 60 deg
2) Humidity : 0 ~ 85 %
- 6 -
Remark
FHD
LGD
LGE Internal Use Only