Installation; Check Of Rom Version; Supplied Accessories - Sony BVP-900P Maintenance Manual

1-1. Check of ROM Version

When the BVP-900/900P is used under the camera system using MSU-700 and CNU-700, be sure to
check that the ROM version for IC10 on the CPU-171 board of the MSU-700 is Ver. 3.00 or higher and
that the ROM versions for IC4 and IC5 on the AT-89 board of the CNU-700 are Ver. 3.00 or higher.
If ROM replacement is required, contact your local Sony Sales Office/Service Center.
ROM Version
MSU-700
IC10/CPU-171 board
CNU-700
IC4 and IC5/AT-89 board

1-2. Supplied Accessories

Accessories
Angle adjustment brackets
Number plates (For side panel)
Clamp bands
Number plate (For rear panel)
Number plate (For UP tally lamp)
BVP-900 P1
Section 1

Installation

Ver. 3.00 or higher
Ver. 3.00 or higher
Sony Part No.
2-280-511-01
3-185-945-01
3-612-712-01
3-612-749-01
4-027-937-01
Qt'y
2
2
2
1
1
1-1 (E)