Installing And Removing An M.2 Module; Remove The Cover - Fujitsu Lifebook T937 Operating Manual

Removing and installing components during servicing

Installing and removing an M.2 module

Remove the cover

► Prepare for removal, see
► Remove the screw (1).
Keep the screw in a safe place. If you are removing more than one component at
the same time, store the screws for the individual components separately from each
other. If you install the wrong screws, components may be damaged.
The screws are not all the same length and when the cover is installed,
the correct screws must be used.
► Lift the cover off the notebook (2).
82
"Preparing to remove components", Page
1
2
78.
Fujitsu