Control Panel And Features - Whirlpool 3LWED5500 Use And Care Manual

CONTROL PANEL & FEATURES
1 POWER/STANDBY BUTTON
Press to turn the dryer on and off.
DRYER CYCLE KNOB
2
Use your Dryer Cycle knob to select available cycles on
your dryer. Turn the knob to select a cycle for your laundry
load. See "Cycle Guide" for detailed descriptions of cycles.
Timed Dry
Will run the dryer for the specified time on the control.
On models with a selectable temperature knob, you may
choose a setting based on the fabrics in your load. Drying
time and temperature will depend on your dryer model.
Automatic Cycles with ACCUDRY Control
Senses moisture in the load and air temperature and
shuts off when the load reaches the selected dryness
level. Gives the best drying in the shortest time. Drying
time will vary based on fabric type, load size, and dryness
setting.
START/PAUSE BUTTON
3
Press to start a cycle, or press once while a cycle is in
process to pause it.
OPTIONS AND SETTINGS
4
Temp
Select a drying temperature based on the fabrics in your
load. If you are unsure of the temperature to select for
a load, select the lower setting rather than the higher
setting.
NOTE: The Air Dry Temp Feature is not available on the
Automatic Cycles.
Wrinkle Shield Feature
When you are unable to remove a load of clothes
from the dryer as soon as it stops, wrinkles can form.
The WRINKLE SHIELD feature periodically tumbles,
rearranges, and fluffs the load to help keep wrinkles
from forming.
Press the WRINKLE SHIELD button to turn ON
n
or OFF at any time before the cycle has ended.
1 2
5
Not all features and options are available on all models.
Appearance may vary.
3
Cycle Signal
The Cycle Signal produces an audible sound when the
drying cycle is finished. Promptly removing clothes
at the end of the cycle reduces wrinkling.
Press CYCLE SIGNAL to turn on.
NOTE: When the Wrinkle Shield setting is selected
and the Cycle Signal is on, the tone will sound every
20 minutes until the clothes are removed, or the Wrinkle
Shield setting ends.
CYCLE STATUS LIGHTS
5
Lights indicate the progress of the drying cycles.
Wet
The load is still wet and/or the cycle just started.
Damp
This indicator shows that the load is partially dried and
items that you may wish to hang up or iron while still
damp may removed.
Cool Down
The dryer has finished drying with heat, and is now
tumbling the load without heat to cool it down and
reduce wrinkling.
Done
This will indicate that the selected cycle has ended and
the load may be removed from the dryer. If the Wrinkle
Shield option has been selected, the dryer may continue
to tumble the load, even if the Done indicator is lit.
d
Wrinkle Shiel
This indicator will light if the Wrinkle Shield option has
been selected and is running. The dryer will continue to
tumble the load for up to 90 minutes after the cycle has
ended.
4
5