Zenith DVD5201 Service Manual page 13

Fig.(B)
MOT OR ASSEMB LY MAIN
GEAR WHEE L MAIN
MOT OR ASSEMB LY MAIN
4. Base Assembly Main(Fig. 4-4)
Note
¥ Put the Base Assembly Main face down(Bottom Side).
4-1. PCB Assembly Main Mode
1 ) Unconnect the Connectors (C8), (C9).
2 ) Release three Screws(S9).
Note
¥ When reassembling, align the Mode Switch position as
Fig.(A).
¥ Put the Base Assembly Main on original position(T op Side)
4-2. Gear Slider
1) Release Screw(S10).
4-3. Gear Exchange
1) Release Screw(S 11).
4-4. Gear Main
1) Release Screw(S12).
VR166 - 923-03461
MECHANISM
GEAR SLIDER
GEAR MAIN
(S12)
GEAR EXCHANGE
(S11)
GEAR LOADING
(S15)
(S15)
(S14)
(L4)
MODE SWITCH
Fig.(A)
(S9)
(S10)
GEAR UP/DOWN
(S13)
Fig.(C)
(S9)
(S9)
Fig. 4-4
Note
¥ When reassembling, align the (A) position of the Gear Main
to the (B) position of Mode Switch as Fig.(B)
4-5. Gear Up/Down
1) Release Screw(S13).
Note
¥ Reassembling, turn the Gear Up/Down in direction of arrow
as Fig.(C).
4-6. Gear Wheel Main
1) Release Screw(S14).
4-7. Gear Loading
4-8. Motor Assembly Main
1) Release 2 Screws(S15).
2) Unlock the Locking T ab(L4).
4-9. Base Main
13
BASE MAIN
(C9)
(C8)
PCB ASSEMB LY MAIN MODE
DVD2 - SERVICING