Chipset Driver Package Installation; Gigabit Ethernet Driver Installation - Acer Altos T110 F4 Installation & Configuration Manual

Altos T110 F4 Installation Configuration Guide
NOTE. Please copy Intel Onboard SATA RAID driver from
Resource CD to a floppy diskette or USB flash drive.
NOTE. For OS installation, a USB optical drive is required
as well. Please prepare a USB Hub to have USB keyboard,
USB mouse, USB floppy/flash drive and USB optical drive
connected.
Please boot the system from the Windows Server 2012 R2
1.
DVD. Follow the instructions to do the installation.
When "Where do you want to install Windows" message
2.
displayed, please Insert the USB flash which includes
the Intel Onboard SATA RAID driver and click on "Load
Driver".
Specify the Raid folder that includes the Intel
3.
Onboard SATA RAID driver and the system will show the
available driver. Select "Intel(R) C600+/C220+ Series
Chipset SATA RAID Controller as target driver.
After loading the RAID driver, you could click "Drive
4.
options" to partition the drive or click "Next" to use
default disk partition setting directly.
Follow the normal procedure to finish the installation.
5.

Chipset Driver Package Installation

Please insert the Resource CD into the optical drive
1.
Select Resource Kit.
2.
Select model and click on Drivers.
3.
Find the Chipset Driver by expanding the directory in
4.
the following order, Altos T110 F4 -> (On board)
Chipset -> Intel Chipset INF files.
Select Windows Server 2012 R2 then click on Browse.
5.
Double-click on Setup.exe and follow the instructions
6.
to complete the driver installation.
After the installation is completed, reboot the system.
7.

Gigabit Ethernet Driver Installation

Please insert the Resource CD into the optical drive.
1.
Select Resource Kit.
2.
Select model and click on Drivers.
3.
3