Reducing Noise On Subgroups, Monitor And Effects Buses - Behringer Denoiser SNR2000 User Manual

If the mixer features a “line level insert” (either pre or post equalizer), the DENOISER should be inserted here.

3.2.3 Reducing noise on subgroups, monitor and effects buses

For this application there are several options:
1. If your mixer features subgroup inserts, you can reduce noise in subgroups separately.
2. You can also connect monitor or effects buses (aux sends) to the BEHRINGER DENOISER and route the
signal back to a channel input. For this purpose, the respective signals have to be taken “pre fader”, while
the respective channels must be muted. We recommend to use the DENOISER as the last component in
the chain of effects devices. The overall signal will then be processed by the DENOISER and sent
back to the mixer’s master section via the “effect returns”.
DENOISER SNR2000
Fig. 3.2: Noise reduction during recording
Fig. 3.3: Noise reduction using the “line insert”
3. APPLICATIONS 17