Replacement Of The Power Amplifier Ic - Panasonic SA-AK22 Service Manual

www.freeservicemanuals.info 12/10/2014
direction of the arrow 2.
Note:
Insert a short pin into the flexible cable for traverse unit.
- Installation of the CD servo P.C.B. after replacement
Step 1 Connect the FFC board.
Step 2 Install the CD servo P.C.B. in the traverse deck assembly.
Note:
Before installing the CD servo P.C.B., move the optical pickup towards the outer edge from the
marking (black triangle). [Otherwise, the reset detect switch (S701) mounted on the CD servo P.C.B.
may be damaged.]

2. Replacement of the Power Amplifier IC

Step 1 Follow the procedures in 'Checking Procedure for each major P.C.B.' ( Step 1 - Step 4).
21
Digitized in Heiloo, Holland