Summary of Contents for Pyle PHLOR44
-
Page 2: Important Safeguards
IMPORTANT SAFEGUARDS All information in this section is provided to instruct you in the correct and safe operation of this device so that you can avoid injures to yourself and others as well as damage to property. READ ALL INSTRUCTIONS BEFORE USING DANGERS Toddlers, infants, people who are unable to operate should not allowed use this appliance. -
Page 3: Charging Base
Nozzle Nozzle Release Button ON/OFF Button Mode Button Mode Indicator Water Tank Charging Base Cover Charging Base Water Tank Cup Note: There may be some liquid remaining inside the main appliance before use (tank, water suction tube, etc), this is the remaining distilled water that was used for the performance (water flow) test, so there are no health concerns. - Page 4 Using the Water Flosser: Attach nozzle onto the unit. Open the water tank cap to fill with water, which temperature should not exceed 40ºC, then close the cap. You can also slide the water tank off of the unit before refilling. Press the “Mode”...
- Page 5 Using the Water Flosser: Hold the unit in an upright position with nozzle tip point toward your teeth Keep your mouth opened slightly so that the water can flow out. Press “On/Off” key to start irrigating. (Fig. 6) Directing the water jet flow at a 90-degree angle to the teeth and gums Directing the water jet slowly along the teeth Directing the water jet along the gum line with the nozzle tip at a 90-degree angle to the gum tissue Cleaning between the teeth and around any braces, crowns or bridgework thoroughly.
- Page 6 Note: To prevent bacteria propagating, make sure there is no remaining water inside the unit after use. If you’re not going to use this appliance for long time, be sure wipe and dry the appliance immediately after use. Maintenance Use only water or neutral cleaning agents to clean the device. Never use caustic, abrasive/harsh agents/chemicals (e.g., vinegar or lime scale removers), since they may damage the device.