JVC LT-32C31BJE Service Manual page 13

3.1.9 REMOVING THE SPEAKER
• Remove the STAND.
• Remove the REAR COVER.
(1) Remove the 5 screws [a], and remove the SPEAKER BOX.
(2) Remove the 4 screws [b], and remove the SPEAKER (L /
R).
(3) Remove the 4 screws [c], and remove the DUCT(L/R).
NOTE:
Since the speaker is attached in a certain direction, attach the
speaker in the same correct direction as it has been attached.
TOP FRAME
e
FRAME(R)
d
TOP
INVERTER UNIT
FRONT PANEL
j
CENTERFRAME
j
k
f
p
f
e
m
r
r
BOTTOM
INVERTER UNIT
3.1.10 REMOVING THE LCD PANEL UNIT
• Remove the STAND.
• Remove the REAR COVER.
• Remove the POWER CORD.
• Remove the RECEIVER.
• Remove the FRONT CONTROL PWB.
• Remove the FRONT SENSOR PWB.
• Remove the VIDEO PWB.
• Remove the DIGITAL INPUT MODULE PWB.
• Remove the MI-COM & DIST MODULE PWB.
• Remove the POWER PWB.
(1) Remove the 3 screws [d], the 2 screws [e] and the 2 screws
[f] (7 screws in total). Then, remove the FRAME(R).
(2) Remove the 3 screws [g], and the 2 screws [h] (4 screws in
total). Then, remove the FRAME (L).
(3) Remove the 4 screws [j]. Then, remove the CENTER
FRAME.
(4) Remove the 2 screws [k] and the 1 screw [m] (3 screws in
total). Then, remove the TOP FRAME.
(5) Remove the 4 screws [n], and the 2 screws [p] (6 screws in
total). Then, remove the BOTTM FRAME.
(6) Remove the 8 screws [r]. Then, remove the TOP
INVERTER UNIT and BOTTOM INVERTER UNIT.
(7) Remove the 1 screw [q]. Then, remove the LCD PANEL
UNIT.
k
h g
FRAME(L)
h
j
p
n
b
b
b
SPEAKER
Fig.2
q
n BOTTOM FRAME
a
LCD PANEL
UNIT
SPEAKER BOX
c
DUCT
b
SPEAKER
c
DUCT
(No.YA015)1-13