Table of Contents
Advertisement
"Up" button
To increase the values.
"Down" button
To decrease the values.
"Defrost" button
Manual defrost activation.
ATTENTION
Do not use mechanical
devices or other means to
speed up the defrost pro-
cess, unless recommended
by the manufacturer.
Be careful not to damage
the circuit.
The appliance is equipped with an automat-
ic defrost device. A manual defrost cycle can
be started by keeping the button pressed
for at least 5 seconds (the display shows the
message DFb).
In freezer models this function is signalled
by lighting up of the defrost icon.
In refrigerated models signalling occurs
by lighting up of the defrost icon and the
fans LED.
Defrost is with forced ventilation only for
refrigerated models.
Defrost can be stopped manually by press-
ing the relevant button for a few seconds:
the display shows the message dFE. Defrost
cannot be activated in the continuous cycle
programming phase*.
*If the continuous cycle is activated and
the button is pressed, defrost will be carried
out at the end.
Light button
Available in models with glass door, its
purpose is to switch on the inside light. In
freezer models with fully insulated door, it
changes the brightness of the compart-
ment light.
82
C.1.1.3 Digital temperature controller display
The digital temperature controller has a 3-digit electronic
display and several signalling icons (see g.1)
lit up indicates compressor activation
lit up indicates defrost function
lit up indicates activation of compartment
lit up
fans
signals useful information regarding
lit up
appliance operation (alarms)
lit up indicates activation of auxiliary users
lit up
(if available)
lit up indicates HISTORY function activated
C.1.2 Alarms and signalling
The message is signalled by lighting up of
the icon. The alarm icons are also associ-
ated with the colour of the lamp that
changes when there is an alarm (red).
Signalling is also indicated by the corre-
sponding code appearing on the display
and activation of an audible alarm.
C.1.2.1 Alarm silencing
Alarms are silenced by pressing on the lit icon. The value shown
on the display is also automatically reset.
Hide quick links:
Advertisement
Table of Contents
