Table of Contents
Advertisement
The remote control allows you to operate the function keys on the projector and to emulate mouse
function when the projector is connected to a computer.
Main Unit
Standby/On
Freeze
Magnify
Disk Pad
Menu
Blank
Source
Mute
Volume
Laser
Mouse Left-Click
Mouse Right- Click When operating in mouse emulation mode, it registers a right mouse click.
Exit
Drag
Inserting Batteries in the Remote Control
Be sure to follow instructions in placing batteries into the remote control units.
Push and slide the lid in the direction of the arrow.
•
Install two 'AAA' batteries as indicated inside the battery compartment.
•
Replace the lid and snap into place.
•
Caution
•
Avoid excessive heat and humidity.
•
Do not mix new and old or different types of batteries.
English 10
Downloaded From projector-manual.com BenQ Manuals
To turn the projection lamp on and off.
Pressing this button displays a still (frozen) picture.
Pressing this button partially magnifies a displayed picture.
(Move the picture with the Disk Pad after pressing the Magnify button.)
When the OSD menu is active, Disk Pad acts as
the on-screen menus are not active, it works as mouse pad. When the magnify
function is active, use disk pad to move through the picture.
Call the OSD Menu.
To enter sub pages.
To select items.
The blank screen is displayed by pressing Blank. And the blank screen will be
revealed partially from top to bottom by pressing Blank again.
Selects the input source.
Mutes the sound.
Adjusts volume. The sound gets louder or quieter by pressing the "+" or "-"
button.
Laser pointer on button. Use as a stick (for indication).
When operating in mouse emulation mode, it registers a left mouse click.
(bottom button)
To leave current OSD Pages.
To move Left/Right among OSD items.
Function
selecting device. When
Advertisement
Table of Contents
