Table of Contents
Advertisement
Doc Title
:
User's Guide
Model
:
Motorola L70×CBT
Glossary of terms
Below are some terms used in this User's Guide to help you become familiar with using your Bluetooth devices
and your new telephone system.
Bluetooth mobile phone - Refers to a Bluetooth enabled mobile telephone.
CELLULAR line - The communications service provided through your Bluetooth enabled mobile telephone.
HOME line - Your conventional telephone land line.
Pairing - This refers to the process of two Bluetooth devices registering device information with each other. The
telephone base must be paired with a Bluetooth enabled mobile phone before the Bluetooth device can be used.
IMPORTANT INFORMATION
․
Refer to the User's Guide of your mobile phone for more information about its Bluetooth function.
․
Make sure that your Bluetooth enabled mobile phone is between one to twelve feet away from the telephone
base in order to maintain a clear and consistent connection among your Bluetooth mobile phone, telephone base
and cell tower.
․
Make sure that your Bluetooth enabled mobile phone has sufficient signal strength. You may need to move the
Bluetooth enabled mobile phone and telephone base to a location where the cellular signal may be stronger.
․
Charge your Bluetooth mobile phone while it is connected to the telephone base because your mobile phone's
battery will discharge faster while it is connected wirelessly to the telephone base.
․
Monitor your mobile phone's usage because airtime is deducted from your cellular plan for the duration of the
CELLULAR calls.
3.2
Setup Cellular
To pair and connect a Bluetooth enabled mobile phone, place your mobile phone near the corded base phone.
1. Press <MENU> and then <+/-> to select BLUETOOTH.
2. Press <MENU> and then <+/-> to select SETUP CELL.
3. Press <MENU> and display will show CELL READY?
NOTE
If there are already four mobile phones paired up:
1) The corded base displays 4 CELLS MAX., and then REPLACE?
2) Press <MENU> and then <+/-> to select a device on the paired list to be replaced.
3) Press <Menu> and REMOVED displays, and then CELL READY?
4. Press <MENU> and display will show DISCOVERABLE. The Bluetooth feature will be activated.
5. Using your Bluetooth enabled mobile phone, turn on the Bluetooth feature and search for a new device.
6. Once your Bluetooth enabled mobile phone has found the Motorola L702CBT / L703CBT / L704CBT /
L705CBT telephone, select it.
7. Using your Bluetooth enabled mobile phone, enter the PIN code of the telephone (the default PIN code is
0000) to continue the pairing process.
8. Pairing will be confirmed when you hear a tone and the <Bluetooth icon> and <device #1 icon> / <#2 icon>
appear on the cordless handset. The corded base displays COMPLETED.
Refer to the User's Guide of your Bluetooth enabled mobile phone to learn how to search for or add new Bluetooth
devices.
NOTE
․
Paired device(s) will be connected automatically and stored into the paired devices list and the active devices
list.
․
When a device is successfully connected, the corresponding <device #1 icon> or <#2 icon> will be displayed.
․
If you would like to pair up another Bluetooth device, please repeat the steps as above.
3.3
Paired devices
3.3.1 Connecting/removing a paired device
The cellular(s) paired up will be displayed in the paired devices list, no matter whether it(they) is(are) connected or
not. You can choose to connect or remove the cellular from this menu.
1.
Press <MENU> and then <+/-> to select BLUETOOTH.
2.
Press <MENU> and then <+/-> to select PAIRED LIST.
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Revision :
Page(s) :
1.0
15 of 40
Advertisement
Table of Contents
