DISASSEMBLY INSTRUCTIONS SIZES 09−12 (CONT)
2
Fan assembly
4) Remove the front
panel screws,
including the motor
holder screws and
then remove the
front panel.
5) Remove the right
side plate screws
and remove the
right side plate.
How to remove the fan
assembly.
1) Remove the panel
plate as stated in
section 1 then
remove the hex
nut securing the
fan and then
remove the fan.
Top panel
screw
Left plate screws
Motor holder screws
Fan
53
Front panel screws
Electronic control box
Reactor
Compressor and
liquid-gas separator
Nut securing the fan