Samsung AS12SGGE Training Manual page 40

Checking and Testing Operations
5-5. Checking and Testing Operations
To complete the installation, perform the following checks and tests to ensure that the air conditioner is operating
correctly.
1. Review all the following elements in the installation:
Installation site strength
Piping connection tightness to detect any gas leakages
Connection wiring
Heat-resistant insulation of the piping
Drainage
Earthing wire connection
Correct operations (follow the steps below)
2. Press the On/Off button.
The indicator lights on the indoor unit flash at half-second intervals.
Result
While the indoor unit opens, the indoor unit fan runs to start.
3. Press the button.
The outdoor unit operates in cooling or heating mode as following the
Result
room temperature.
4. Air flow direction
Press the button and check that the air flow blades work properly.
5
INSTALLATION
SAMSUNG | 39