Specifications; Application Range; Test Method - LG 32LE2R Service Manual

NOTE : Specifications and others are subject to change without notice for improvement.

1. Application range

This specification is applied to LP61A chassis.
2. Requirement for Test
Testing for standard of each part must be followed in below
condition.
(1) Temperature : 25°C±5°C(77±9°F), CST : 40±5
(2) Humidity : 65%±10%
(3) Power : Standard input voltage (AC 100-240V, 50/60Hz)
*Standard Voltage of each products is marked by models
(4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
(5) The receiver must be operated for about 20 minutes prior
to the adjustment.
4. General Specification(LCD Module)
No Item
1. Display Screen Device
2. Aspect Ratio
3. LCD Module
4. Operating Environment
5. Storage Environment
6. Input Voltage
7. Power Consumption
5. Feature and Function
No Item
1. RF Input
SCART
Input/Output
AV Input
Audio Out(R/L)
Component Input
RGB Input
HDMI Input
RS-232C
IR Input
SPECIFICATION
Specification
32", 37", 42" wide Color Display Module
16:9
32", 37", 42" TFT WXGA LCD
1) Temp. : 0 ~ 40 deg
2) Humidity : 0 ~ 85%
3) Temp. : -20 ~ 60 deg
4) Humidity : 0 ~ 85 %
100 - 240V~, 50/60Hz
Power on/off : ≤ max 160W (32")
≤ max 190W (37")
(Green)
St-By(Red) : 1.0 W (26",32")
1 1 Tuner
(PAL BG/I/DK, SECAM-L)
1 FULL(CVBS/L/R,1H-RGB/L/R,TV_OUT)
1 HALF(CVBS/L/R,S-VHS,MNT_OUT)
2 CVBS/L/R, S-VHS(S-VHS Priority)
1 Variable Audio Out
1 480i /576i/480p/576p/720p/1080i
1 RGB-PC : Up to WXGA 60Hz
RGB-DTV : 480p/576p/720p/1080i
1 HDMI-DTV :
480i/576i/480p/576p/720p/1080i
1 Remote Control
1 Wired IR
- 6 -

3. Test method

3.1 Performance : LGE TV test method followed
3.2 Demanded other specification
Safety : CE, IEC Specification
EMC : CE, IEC
LCD
MAKER:AUO/CMO/LPL
LGE SPEC
Volume: 1/8 volume of sound distortion point
Specification
Remark
Remark
Rear
Rear
Rear and Side
Rear
Rear
Rear
Rear
Rear
Rear