Control Computer Features from a Projected Screen (Computer Interactive Mode)
e
Press the [Menu] button, select the Extended menu, and then press
[Enter].
f
Select the USB Type B setting, and then press the [Enter] button.
g
Select one of the following:
• To use computer interactive mode with a computer cable, an HDMI
cable, or over a network, select Easy Interactive Function.
• To use computer interactive mode and USB Display at the same
time, select USB Display/Easy Interactive Function.
• When projecting using USB Display, response time may be
a
slower.
• Using two interactive pens at the same time may cause
interference in some applications. Move the unused interactive
pen away from the projection screen.
• Select the Pen Operation Mode setting in the Easy Interactive
Function setting in the projector's Extended menu according
to the operating system of the connected computer.
s Extended > Easy Interactive Function > Pen Operation
Mode
h
Press the [Menu] button to exit the menus.
i
Make sure you have calibrated the first time you use your projector.
j
Hold an interactive pen close to the projected screen, or touch the
projected screen with your finger.
The
icon is displayed on the projected screen.
92