Setting Media Advance Correction Values - Oce CS6407 Quick Reference Manual

Setting media advance correction values

- The factors that change the media advance correction
values are as follows.
• Change of print mode
• Pressure change using the pressure control knob
• Use/not use of take-up reel unit
• Type of media
• Diff erence in media feed route
1
Set media longer than 4 m.
Find the rough media advance correction value in
[ROUGH] and determine the media advance correction
value in [DETAIL]. Both [ROUGH] print and [DETAIL]
print need paper of about 90 cm in length for one-time
print. (To cancel printing of media advance correction
pattern, press the C AN CEL
2
Set the printer to the offl ine mode.
(Press the key.)
O N L I N E
I N K M E D I A R E G
M E D I A M . A D V
3
Press the key and then
media advance correction pattern.
# M E D I A A D V P R I N T
> R O U G H ( N O R M A L 1 )
Select the print mode to be used normally for the
media to set the media advance value.
Note
- To obtain the media advance correction value in DENSITY2 mode,
apply the media advance correction patterns, ROUGH(QUALITY)
or DETAIL(QUALITY).
4
Select the rough print mode with the
keys, and press the
# M E D I A A D V P R I N T
* O K ?
5
Press the key. Then the media advance
correction pattern [ROUGH] is printed in the
selected print mode.
# M E D I A A D V P R I N T
* E X E C U T I N G
6
Select a rough media advance correction value
from the print result.
Nine patterns are printed with 0.5% increments within
a range of 99.00% to 101.00%. Select a rough media
advance correction value from them.
key.
key to display the
and
key.
7
Press the key and then the
the media advance correction value.
# M E D I A A D V V A L U E
> 0 1 : 0 9 9 . 8 0 %
8
Enter the media advance correction value and
press the key.
Align the digit with the
value with the and
9
Press the key and then the
the media advance correction pattern.
# M E D I A A D V P R I N T
> R O U G H ( N O R M A L 1 )
10
Select the detail print mode with the
keys.
Select the same print mode as for [ROUGH].
# M E D I A A D V P R I N T
> D E T A I L ( N O R M A L 1 )
11
Press the key twice to print the media
advance correction pattern [DETAIL].
# M E D I A A D V P R I N T
* E X E C U T I N G
12
Select the detail media advance correction
value from the print result.
Five patterns are printed for the entered rough media
advance correction value with 0.1% increments within
a range of -0.20% to +0.20%. Select an appropriate
media advance correction value from them.
13
Press the key and then the
display the media advance correction value.
# M E D I A A D V V A L U E
> 0 1 : 0 9 9 . 8 0 %
14
Enter the determined media advance
correction value and press the
Align the digit with the
value with the and
15
Press the key to return to the offl ine state.
key to display
and keys and set the
keys.
key to display
and
key to
key.
and keys and set the
keys.
15