Table of Contents
Advertisement
Minor faults in the performance of the washing machine, some of which may result
from incorrect operation, can be put right without contacting the Service Depart-
ment.
The following guide may help you to find the reason for a fault, and to correct it.
You should, however, note the following:
Repair work to electrical appliances should only be carried out by a suitably
qualified person in strict accordance with current local and national safety regu-
lations. Repairs and other work by unqualified persons could be dangerous. The
manufacturer cannot be held liable for unauthorised work.
The programme does not start
Problem
The control panel re-
mains dark.
and alternately ap-
pear in the time display.
Cause and remedy
There is no power to the machine.
Check whether the mains plug is plugged in and
switched on.
Check whether the fuse or circuit breaker has
tripped.
The washing machine has switched off automatically
to save energy.
Switch the washing machine on again by turning
the programme selector.
The door is not closed properly. The door lock could
not engage.
Close the door again.
Start the programme again.
If the fault message appears again, contact the
Service Department.
Problem solving guide
47
Hide quick links:
Advertisement
Table of Contents
