4 Configuration Example of the Internetworking
7.
8.
9.
10. Click Apply. Then click OK in the Are you sure to submit? dialog box that is displayed
Step 5 Configure the interzone packet filtering rule.
1.
2.
3.
Step 6 Configure a specific route.
4-4
Figure 4-5 Configuring the PPP user on the Dialer interface
Click Apply. Then click OK in the Are you sure to submit? dialog box that is displayed
to complete the configuration.
Click back, then return to Interface interface.
In the PPPOE Dialer interface Config group box, click Detail Config. The Dialer
interface detail Config interface is displayed.
Figure 4-6 Configuring the Dialer interface
to complete the configuration.
Choose Security > Packet-Filter. The Packet-Filter page is displayed.
Click MORE corresponding to trust-untrust. The Packet-Filter Config page is displayed.
Figure 4-7
shows the parameter setting.
Figure 4-7 Configuring the packet filtering rule between the Trust security zone and the
Untrust security zone
Click Apply. Then click OK in the Are you sure to submit? dialog box that is displayed
to complete the configuration.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
HUAWEI EGW2100
Web Configuration Guide
Figure 4-6
shows the parameter setting.
Issue 01 (2010-02-20)