Samsung SMT-i5343 User Manual page 82

[AOM Button Setting]
To change the AOM button function, move to
1
a desired AOM button and press the [OK]
button.
After moving to a desired AOM button by
2
using the navigation button, press the [OK]
soft button.
Enter the information and press the [Save]
3
soft button.
- If the entered information is not correct, the AOM
button function cannot be registered.
- [Delete]: You can delete a registered AOM button
function.
The AOM button setup function may not be available depending on system.
If this function does not work properly, contact the system administrator.
For detail information about how to use the AOM button function, refer to the SCM
operation manual.
80
_ © SAMSUNG Electronics Co., Ltd.