Pioneer AVH-2330NEX Operation Manual page 99

Menu Item
[Time Alignment]
[On] [Off]
Listening position*1*2
[Off] [Front-L] [Front-R]
[Front] [All]
Standard Mode*3*5
[Front Left] [Front Right]
[Rear Left] [Rear Right]
[Subwoofer]
Network Mode*3*5
[High Left] [High Right]
[Mid Left] [Mid Right]
[Subwoofer]
Distance
[0] to [140]
[Auto EQ]
[On] [Off]
[A-EQ&TA Measurement]
[Save Settings]
[Load Settings]
[Initial Settings] [Sound
Setting] [Auto EQ&TA
Setting]
[BASS Boost]*1
[0] to [6]
[Rear Speaker Output]*1
[Rear] [Subwoofer]
Description
Select or customize the time alignment settings to reflect
the distance between the listener's position and each
speaker. You need to measure the distance between the
head of the listener and each speaker unit.
1
Touch or
select the alignment speaker.
2
Touch or
selected speaker and listening position.
TIP
If you touch [TA On], the time alignment is turned off mandatorily.
NOTE
This function is available only when the listening position setting
is set to [Front-L] or [Front-R].
Set the auto-adjusted equalizer to suit the vehicle's
acoustics. To use this function, the Auto EQ measurement
must be done in advance (page 101).
Measures and adjusts the vehicles acoustics, equalizer, and
time alignment automatically to suit the vehicle interior
(page 101).
Save to recall the following current sound settings by
touching [OK]: bass boost, slope, subwoofer phase, speaker
level, Graphic EQ, HPF/LPF, listening position, crossover,
time alignment.
TIP
When you touch [Cancel], return to the [Audio] setting screen.
Load the sound settings.
NOTES
• [Sound Setting] is available only when you have already saved
the sound settings (page 99).
• [Auto EQ&TA Setting] is available only when you have already
performed Auto EQ measurement (page 100).
Adjust the bass boost level.
Select the rear speaker output.
NOTE
This function is available when [Standard Mode] is selected as the
speaker mode.
- 99 -
to select the listening position then
to input the distance between the