Table of Contents
Advertisement
To run HP Battery Test:
1.
Shut down the tablet.
2.
Press the power button and when the Press and hold the Volume down button or the ESC key on
external Keyboard to enter Startup Menu message displays, press the volume down button.
The Startup menu is displayed.
3.
Tap F2 System Diagnostics.
4.
Select Component Tests, select Battery, and then ollow the on-screen instructions.
Displaying the remaining battery charge
▲
Tap the Power meter icon
Maximizing battery discharge time
Battery discharge time varies depending on features you use while on battery power. Maximum discharge
time gradually decreases as the battery storage capacity naturally degrades.
Tips for maximizing battery discharge time:
●
Lower the brightness on the display.
●
Select the Power saver setting in Power Options.
Managing low battery levels
The information in this section describes the alerts and system responses set at the factory. Some low-
battery alerts and system responses can be changed using Power Options. Preferences set using Power
Options do not affect lights.
Type power options in the taskbar search box, and then select Power Options.
Identifying low battery levels
When a battery that is the sole power source for the tablet reaches a low or critical battery level, the following
behavior occurs:
●
The Power meter icon
If the tablet is on or in the Sleep state, the tablet remains briefly in the Sleep state and then shuts down and
loses any unsaved information.
Resolving a low battery level
Resolving a low battery level when external power is available
Connect one of the following devices:
▲
●
AC adapter
●
Optional docking or expansion device
●
Optional power adapter purchased as an accessory from HP
.
shows a low or critical battery notification.
Using battery power
19
Advertisement
Table of Contents
