Table of Contents
Advertisement
The Model Check mode leads to the following test modes:
• Accuracy checking mode
• Home City Switching mode
• Solar Cell-PCB Ass'y Contact Checking mode
• Aging mode
�1
While on the Timekeeping mode, hold down
at the same time to go to the Model Check mode.
C
�1
Press
to check the current display of each LCD.
D
LCD 1
5064
31
Exiting the Model check mode.
• Press
to go the Home City Switching mode.
D
• Press any button except for
7-77
ACCURACY CHECKING
�1
While on the Timekeeping mode, hold down
The LCD turns to the Accuracy Checking mode, and the Mode hand moves 1 second at a time.
�1
Exiting the Accuracy Checking mode.
• Press
to go to Checking the model mode.
D
• Press
and
D
• Press any button except for
7-77
CONFIGURING HOME CITY
You can use this mode to easily switch the city from which "Receiving Signal Check" is allowed.
�1
While on the Timekeeping mode, hold down
�1
Press
two times.
D
LCD 1 indicates the current Home City.
31
Each time
B
Home City Switching mode and return to the Time mode.
NYC LON PAR HKG TYO
Configuration of each Home City
HOME CITY
NYC
LON
PAR
HKG
TYO
41
Exit the Test mode.
• Press
or
A
• Press
to turn the LCD to the All-illumination mode.
D
LCD 2
35�0 �
to return to the Timekeeping mode.
D
at the same time to go to the Aging mode.
B
to return to the Timekeeping mode.
D
is pressed, the Home City switches in the order below. Press
Calibration signal
LCD 1
NYC
LON
PAR
HKG
TYO
to return to the Timekeeping mode.
C
and press
and
D
A
and press
and
D
A
and press
and
D
A
DST Setting
(Default)
(After AC)
WWVB
OFF
MSF
OFF
DCF77
OFF
BPC
OFF
JJY40
OFF
– �� –
�� – –
QW-5117
Location of the buttons and name of
the lcds
LCD 1
LCD 2
at the same time.
C
at the same time.
C
or
to exit the
A
C
Hide quick links:
Advertisement
Table of Contents
