REAR LIGHTS AND SIDE LIGHTS: changing bulbs
1
Direction indicator lights/
brake and side lights
– Open the boot and unscrew bolts 1
using the rear lights key (refer to
the information on the "Tool kit" in
Section 5), then take out the light unit
by pulling it back.
– Release clips 3 to remove bulb
holder 2.
– Unscrew bulb holder 4 or 5 and re-
place the bulb.
Note: ensure that the cable is in place
before inserting the light unit.
2
3
Direction indicator lights 4
Bulb type: PY21W.
Side light and brake light 5
Bulb type: P21/5W.
(1/2)
Refitting
To refit, proceed in the reverse order,
taking care not to damage the wiring.
The bulbs are under pres-
sure and can break when
replaced.
Risk of injury.
4
5
5.17