Samsung AS09HPB Service Manual page 26

No Parts
3 Fan
&
Motor
4 Heat Exchanger
5 Ass'y Valve 4-Way
&
Ass'y Valve EEV
6 Compressor
Samsung Electronics
Procedure
1) Detach the Nut Flange like the picture
on the right side. (Turn counterclockwise
because the screw is right-handed.)
2) Detach the Fan Propeller.
3) Loosen 4 fixing screws to detach the
Motor.
1) Loosen 2 fixing screws on both sides.
2) Disassemble the pipes in both inlet and
outlet with welding torch.
3) Detach the Heat Exchanger.
1) Loosen 4 bolts fixed to assemble Valve
Service with Bracket Valve like the picture
on the right side.
2) Disassemble the pipes assembled the
suction and discharge sides of the
Compressor with welding torch.
1) Loosen the Nut of Terminal Cover.
2) Detach the Terminal Cover and detach
the Connect Comp Wire from
Compressor.
3) Disassemble the Felt Comp Sound.
4) Loosen the 3 bolts at the bottom of
Compressor like the picture on the
right side.
Disassembly and Reassembly
Remark
4-8