H-racer ASSEMBLY GUIDE Model No.: FCJJ-18 Warning To avoid the risk of property damage, serious injury or death: This kit should only be used by persons 12 years old and up, and only under the supervision of adults who have familiarized themselves with the safety measures described in the kit. Keep small children and animals away, as it contains small parts that could be swallowed.
Page 2
Remove the H sticker from its backing and position it on the car accordingly. The assembly of your H-racer is now completed.
Page 3
Enabling DC powered operation: Slowly pour water into the water tank opening above Open the battery compartment located underneath the the refueling station until the water level reaches the refueling station by sliding the cover according to the arrow. top. Let the water rest in the tank for at least 5 minutes before moving on to the next step.
Page 4
Warning: Continuous operation of the Hydrogen Station will damage it permanently. The hydrogen storage tank is now full and the H-racer is ready to race! To run the car, find a smooth, flat surface free of obstacles. Turn the switch located beneath the car's chassis to the "on" position, place it on the ground and watch the car go! It is estimated that on a full tank and after a number of warm-up runs the H-racer will run for up to 3 minutes.
Page 5
If all connections are correct and bubbles are released, and the balloon still does not fill up - your H-racer refueling system is damaged due to improper use. Do not attempt to repair or fix your H-racer, contact support@horizonfuelcell.com for assistance.