Lock Function; Automatic Protection Mechanism - Kenmore 204.77603610 Use & Care Manual

LOCK FUNCTION

To lock the microwave so that it cannot be operated by children or other unintended users, press
pad for 3 seconds. You will hear a long beep. If the clock has been set, "LOCK" will display
for 3 seconds and then disappear. To check, press any pad and "LOCK" will again display for
3 seconds and disappear.
To Unlock, press

AUTOMATIC PROTECTION MECHANISM

When the oven cavity temperature becomes greater than 482°F during cooking, the oven enters
into super high temperature protection status. The digital display will show "E01" and will beep once
a second until is pressed, and the oven will then display the clock time. Oven should reset for
further use. If error code shows a second time, call 1-800-657-6119 for customer assistance.
If the oven cavity temperature is less than 77°F after running continuously for 5 minutes in
Convection or Combination cooking, the oven enters into super low temperature protection status.
The digital display will show "E02" and will beep once a second until
will then display the clock time. Oven should reset for further use. If error code shows a second time,
call 1-800-657-6119 for customer assistance.
If the Sensor system is malfunctioning, the digital display will show "E03" and will beep once a
second until is pressed. Call 1-800-657-6119 for customer assistance.
for 3 seconds, you will hear a long beep and "LOCK" will disappear.
EN-15
is pressed, and the oven