NEC SL1100 Networking Manual page 224

Issue 6.0
Program
Program Name
Number
IP Telephone Terminal Basic
Data Setup – Calling Name
Display
15-05-40
IP Telephone Terminal Basic
15-05-41 Data Setup – Time Zone
IP Telephone Terminal Basic
15-05-43 Data Setup – Video Mode
IP Telephone Terminal Basic
15-05-44 Data Setup – Using STD-SIP
Display for CPN
IP Telephone Basic Setup -
Receiving SIP INFO
15-05-49
Program
Program Name
Number
CPU Network Setup
– Default Gateway
10-12-03
CPU Network Setup
- NAPT Router IP
10-12-07 Address (Default
Gateway [WAN])
CPU Network Setup
- ICMP Redirect
10-12-08
10 - 12
Description/
Comments
Determines whether
SIP INFO messages
are received by the
system.
2.2.8 NAT Mode for Standard SIP terminal (Version 4.0 or higher)
Description/
Comments
Assign the IP Address for
the Router.
Define the IP Address of
the WAN side of the
router.
When receiving ICMP
redirect messages, this
determines of the IP
Routing Table updates
automatically or not.
Assigned Data
0 = Both Name and
Number
1 = Name only
2 = Number only
3 = None
Default = 0
0 ~ 24
(-12 ~ +12 hour)
Default = 12
0 = Disable
1 = Enable
Default = 0
0 = Disable
1 = Enable
Default = 0
0 = Disable
1 = Allowed any time
2 = Allowed while RTP is
not available
Default = 2
Assigned Data
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
Default is 0.0.0.0
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
Default is 0.0.0.0
0 = Enable
1 = Disable
Default is 0
IP Single Line Telephone
NEC SL1100
1 2 3
X
X
X
X
1 2 3
X
X
X