Asus Z170-WS Manual page 101

The following items appear only when you set the Turbo Mode to [Enabled].
Turbo Mode Parameters
Long Duration Package Power Limit [Auto]
Allows you to limit the Turbo Ratio's time duration that exceeds the TDP
(Thermal Design Power) for maximum performance. Use the <+> and <->
keys to adjust the value.
Configuration options: [Auto] [1] - [4095]
Package Power Time Window [Auto]
Also known as Power Limit 1, and allows you to maintain the time window
for Turbo Ratio over TDP (Thermal Design Power). Use the <+> and <->
keys to adjust the value.
Configuration options: [Auto] [1] - [127]
Short Duration Package Power Limit [Auto]
Also known as Power Limit 2, and allows you to provide rapid protection
when the package power exceeds the Power Limit 1. Use the <+> and <->
keys to adjust the value.
Configuration options: [Auto] [1] - [4095]
IA AC Load Line [Auto]
This item allows you to set the AC loadline defined in 1/100 mOhms. Use the <+> and
<-> keys to adjust the value.
Configuration options: [Auto] [0.01] - [62.49]
IA DC Load Line [Auto]
This item allows you to set the DC loadline defined in 1/100 mOhms. Use the <+> and
<-> keys to adjust the value.
Configuration options: [Auto] [0.01] - [62.49]
Tweaker's Paradise
FCLK Frequency for Early Power On [Auto]
This item allows you to set the FCLK Frequency for Early Power On.
Configuration options: [Auto] [Normal (800 MHz)] [1GHz] [400 MHz]
Initial BCLK Frequency [Auto]
This item allows you to start overclocking the system from the initial BCLK (base clock)
frequency to the assigned BCLK frequency. Use the <+> or <-> to adjust the value.
The values range from 40.0 MHz to 500.0 MHz.
BCLK Amplitude [Auto]
This item allows you to set the magnitude of the base clock driven for the processor.
Configuration options: [Auto] [700mV] [800mV] [900mV] [1000mV]
BCLK Slew Rate [Auto]
This item allows you to set the speed at which each clock rises and falls.
Configuration options: [Auto] [1.5V/ns] [2.5V/ns] [3.5V/ns] [4.5V/ns]
ASUS Z170-WS
3-27