ASROCK X99 Taich User Manual page 30

Serial ATA3 Connectors
(SSATA3_0_1:
see p.7, No. 14)
(SSATA3_2:
see p.7, No. 13)
(SSATA3_3:
see p.7, No. 11)
(SATA3_0_3:
see p.7, No. 15)
(SATA3_1_4:
see p.7, No. 16)
(SATA3_2_5:
see p.7, No. 17)
Serial ATA Express
Connector
(SATAE_1:
see p.7, No. 18)
USB 2.0 Headers
(9-pin USB3_4)
(see p.7, No. 19)
(9-pin USB5_6)
(see p.7, No. 20)
24
SSATA3_3 SSATA3_2
USB_PWR
P-
1
P-
USB_PWR
These ten SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
* The SSATA3_3 connector
is shared with the M2_1 ;
the SSATA3_2 connector
is shared with the M2_2.
* RAID is supported on
SATA3_0 ~ SATA3_5
ports only.
Please connect either SATA
or PCIe storage devices
to this connector. The
SATA Express connector is
shared with the SATA3_4
and the SATA3_5.
*The SATA Express
interface is a combination
of SATAE_1, SATA3_5,
and SATA3_4.
Besides three USB 2.0 ports
on the I/O panel, there
P+
GND
are two headers and one
DUMMY
port on this motherboard.
GND
Each USB 2.0 header can
P+
support two ports.