Installing The Desiccant Bags; Installing The Vc5090 In A Forklift; Positioning The Vehicle Computer - Symbol VC5090 Quick Reference Manual

Quick Reference Guide

Installing the Desiccant Bags

Remove the tape securing the desiccant door to the back housing.
1.
Open the desiccant package and remove the six desiccant bags.
2.
Place three desiccant bags in the desiccant well.
3.
Place the other three desiccant bags in the back of the desiccant door.
4.
Carefully place the desiccant door onto the back housing. Ensure that
5.
the desiccant packets do not interfere with placement of the door.
Secure the door to the back housing using the four screws. Torque to
6.
8 ± 0.5 kgf.cm.

Installing the VC5090 in a Forklift

Follow the instructions below to properly install the VC5090 in a forklift.
• Determine the best location for mounting the vehicle computer taking
into consideration the driver's field of view and ease of accessing the
vehicle computer.
• Install the appropriate mounting hardware.
• Connect the vehicle computer to the vehicle's wiring system.

Positioning the Vehicle Computer

• Determine the best position for the vehicle computer and all the
associated components. If a similar vehicle computer was previously
installed, check to see if the position it used is suitable for the
VC5090.
• Test the installation for at least 30 minutes before installing on another
vehicle. Record all details:
7