Digital Input; Option Input (Slot) - Yamaha O1V 96 Service Manual

Digital Input

(2TR IN DIGITAL, ADAT input)

Option Input (SLOT)

Input Channel CH1–32
Stereo Input Channel CH1–4
OSCILLATOR
STEREO OUT
Downloaded from www.Manualslib.com
Available cards
Input patch
Phase
*3
Gate-type
*4
Comp-type
Attenuator
EQ
Delay
On/off
Fader
Aux send
Solo
Pan
Surround pan
LFE level
Routing
Direct out
Metering
Input patch (L/R) —
Phase (L/R)
Attenuator (L/R)
Equalizer
On/off
Fader
Aux send
Solo
Pan (L/R)
Surround pan
(L/R)
LFE level (L/R)
Routing
Metering
Level
On/off
Waveform
Routing
DA converter
manuals search engine
Optional digital interface cards (MY16, MY8, MY4 series)
—
Normal/reverse
On/off
Key in: 12 ch Group (1–12, 13–24, 25–32)/AUX1–8
On/off
Key in: self /Stereo Link
Pre EQ/pre fader/post fader
–96.0 to +12.0 dB (0.1 dB step)
*5
4-band PEQ (TYPE1)
On/off
0–43400 samples
—
100 mm motorized (INPUT/AUX1–8)
On/off
AUX1–8; pre fader/post fader
On/off
Pre fader/after pan
127 positions (Left= 1–63, Center, Right= 1–63)
127 × 127 positions
[(Left= 1–63, Center, Right= 1–63)], [(Front= 1–63, Center, Rear= 1–63)]
–∞, –96 dB to +10 dB (256 step)
STEREO, BUS1–8, DIRECT OUT
Pre EQ/pre fader/post fader
Displayed on LCD
Peak hold on/off
Normal/reverse
–96.0 to +12.0 dB (0.1 dB step)
*5
4band PEQ (TYPE1)
—
100 mm motorized
INPUT/AUX1–8 send
On/off
AUX1–8; pre fader/post fader
On/off
Pre fader/after pan
127 positions (Left= 1–63, Center, Right= 1–63)
127 × 127 positions
([Left= 1–63, Center, Right= 1–63] x [Front= 1–63, Center, Rear= 1–63])
–∞, –96 dB to +10 dB (256 step)
STEREO, BUS1–8, DIRECT OUT
Displayed on LCD
Peak hold on/off
0 to –96 dB (1 dB step)
—
Sine 100 Hz, sine 1 kHz, sine 10 kHz, pink noise, burst noise
BUS1–8, AUX1–8, STEREO L/R
24-bit linear, 128-times oversampling (@fs=44.1, 48 kHz), 64-times over-
sampling (@fs=88.2, 96 kHz)
01V96
5