ABB SM500F User Manual page 29

Field Mountable Videographic Recorder
SM500F
Check this box to stop
recording while in the
configuration mode.
Use and
to highlight a
different selection.
Use to accept
the selection.
The existing security configuration parameters
are retained (i.e. the security configuration
remains as currently configured) when a
configuration is opened from file or when a new
configuration is loaded. Check 'Load security
configuration from file' to overwrite the current
security configuration with data from the file to
be loaded – see
Note 2
Fig. 6.2 Accessing the Configuration Level
Note.
1. If 'New Configuration' or 'Open a Configuration' is selected and the modified configuration file is
saved later as the current configuration, new internal data files for all enabled recording channels
are created and any unarchived data is lost.
2. The option to load or retain the security configuration applies only to Advanced Security mode
and is available only to the System Administrator (User 1). If a new or existing configuration file is
opened by a user other than the System Administrator, the instrument's existing security settings
are retained.
IM/SM500F Issue 10.1
From Fig. 6.1
Cancel and return to
the Operator level.
below.
Edit the current configuration. Changes are not
implemented until saved on exit from the
Configuration level
Open a configuration saved previously to
internal or external storage (up to 16
configurations can be stored in internal
memory) – see
Note 1
open one of the QuickStart templates.
Press to toggle between
internal and external storage.
Press to cancel.
Open a new configuration
with the default settings –
see below.
Note 1
6 Configuration
below. Alternatively,
Press to accept
the selection.
27