Unpacking And Inspecting The Cisco Nexus Fabric Extender - Cisco 2332TQ Hardware Installation Manual

Chapter 2 Installing a Cisco Nexus Fabric Extender
•

Unpacking and Inspecting the Cisco Nexus Fabric Extender

When handling device components, wear an ESD wrist strap and handle modules by the carrier edges
Caution
only. An ESD socket is provided on the chassis. For the ESD socket to be effective, the chassis must be
grounded through the power cable, the chassis ground, or the metal-to-metal contact with a grounded
rack.
Keep the shipping container in case the chassis requires shipping in the future.
Tip
The device is thoroughly inspected before shipment. If any damage occurred during transportation or
Note
any items are missing, contact your customer service representative immediately.
To inspect the shipment, follow these steps:
Compare the shipment to the equipment list provided by your customer service representative and verify
Step 1
that you have received all items, including the following:
•
•
•
•
•
•
Check for damage and report any discrepancies or damage to your customer service representative. Have
Step 2
the following information ready:
•
•
•
•
Make sure that the fan tray and power supplies all use the same direction of airflow.
Step 3
•
•
Wire-stripping tool
Print documentation
Grounding lug kit
Rack-mount kit
ESD wrist strap
Cables with connectors
Any optional items ordered
Invoice number of shipper (see packing slip)
Model and serial number of the damaged unit
Description of damage
Effect of damage on the installation
Port-side exhaust airflow modules do not have a black stripe across the front of the module.
Port-side intake airflow modules have a black stripe across the front of the module.
Cisco Nexus 2000 Series Hardware Installation Guide
Preparing for Installation
2-5