Connect The Cables - Cisco PIX 501 Quick Start Manual

2

Connect the Cables

Computer or other
network device
aptop computer
To connect the cables:
Place the chassis on a flat, stable surface. The chassis is not rack mountable.
Step 1
Connect Port 0, the outside Ethernet port, to the public network:
Step 2
•Use the yellow Ethernet cable (72-1482-01) to connect the device to a switch or hub.
•Use the orange Ethernet cable (72-3515-01) to connect the device to a DSL modem, cable
modem, or router.
Connect your PC or other network devices to one of the four switched inside ports (numbered
Step 3
1 through 4).
4
Yellow
Ethernet
cable
DSL/Cable/ISDN
Printer
PIX 501
Orange
Ethernet
cable
modem
Power
adapter
Internet