Display Connections
Connecting TV or CATV
Connect the RF cable from the antenna or cable
socket to the RF connector labeled as ANT on
the back of the monitor.
Connecting a VCR
Using SCART (AV) socket input
Connect the SCART socket on the
videorecorder to the SCART socket on the rear
panel of the set.
Connect the videorecorder to the antenna wall
socket or cable box.
Using S-Video Input
Connect the S-Video (4-pin DIN) connector from
the VCR to the S-Video input on the back of
monitor.
Connect the red (R) and white (L) audio jacks
from the VCR to the (R) and (L) audio-in jacks
located next to the S-Video connector.
Using TV Input
Connect the antenna out socket on the
videorecorder to the corresponding socke
(ANT) on the rear panel of the set.
Connect the videorecorder to the antenna wall
socket or cable box.
14