Advertisement
<
Plumbing layout
Front View
Hot water supply and water supply conditions
•Public water supply (do not use non-drinkable well water or water that contains
•If the water hardness is 80 ppm or higher, install a water softener to prevent the
Water used
•Use a pressure between 0.1 and 0.4MPa(1 - 4kgf/cm ).
Hot water supply,
•Set the difference between the hot water supply pressure and water supply
water supply
pressure
Hot water
•Set the hot water temperature to 80 °C or less.
temperature
•Set the temperature 10 °C or higher than the shower temperature used.
into the product
•Do not use steam with the hot water supply
Water boiler
>
95 90
75
Usage Condition
rust or sand.)
buildup of scale within the basin body. Aeration may be minimal when using
shampoo even if drinkable well water is used, so a water softener should be
installed.
pressure to within 0.2MPa(2kgf/cm )
Hot water supply Rc 1/2"
Water supply Rc 1/2"
2
3
[mm]
Side View
240
300
2
Hide quick links:
Advertisement
